0.CO;2-HCrossRef 16. Vayssieres L: Adv Mater. 2005, 15:3870. 17. Yen C, Lee CT: Sol Energy. 2013, 89:17.CrossRef 18. Lei L, Chen NF, Bai YM, Cui M, Zhang H, Gao FB, Yin ZG, Zhang XW: Sci China Ser E-Tech Sci. 2009, 52:1176. 19. Sze SM: Physics of Semiconductor Devices. 2nd edition. New York: Wiley; 1981. 20. Tsai MA, Han HW, Tsai YL, Tseng PC, Yu P, Kuo HC, Shen CH, Shieh JM, Lin SH: Opt Express. 2011, 19:757. 10.1364/OE.19.000757CrossRef

Competing interests The authors declare that they have no competing interests. Authors’ contributions CCC, BTT, and KLL carried out the InGaP/GaAs/Ge solar cell process and hydrothermal growth of ZnO nanotube and Paclitaxel chemical structure drafted the manuscript. YTH and HWY carried out the device measurements, including I-V, QE, and reflectance. NHQ carried out material analysis, including TEM and SEM. EYC conceived this work and participated in selleckchem its Staurosporine in vitro design and coordination. All authors read and approved the final manuscript.”
“Background Antireflection coatings play a major role in enhancing the efficiency of photovoltaic devices by increasing light coupling into the region of

the absorber layers. Presently, the standard antireflection coatings in thin-film solar cells are the transparent thin films with quarter-wavelength thickness. In addition, the quarter-wavelength thickness antireflection coating is typically designed to suppress optical reflection in a specific range of wavelengths [1, 2]. Also, it works only in a limited spectral range for a specific angle of incidence, typically for near-normal incidence. Recently, the availability of nanofabrication technology has enabled the engineering of materials with desired antireflection characteristics such as electron beam lithography Urease and dry etching, which have been widely used to fabricate different antireflection nanostructures [3, 4]. However, they require expensive cost of equipment and technology

for fabricating nanostructures on large-area solar cells. In addition, surface recombination defects induced by etch process will decrease the device performance. Consequently, the nanostructures fabricated by using bottom-up grown methods have been developed [5–7]. Recently, zinc oxide (ZnO) nanostructures have become regarded as suitable for forming efficient antireflection coatings, taking advantage of their good transparency, appropriate refractive index, and ability to be formed as textured coatings by anisotropic growth. Also, ZnO exhibits several favorable material characteristics, such as its abundance, wide direct band gap (3.3 eV), low manufacture cost, non-toxicity, large exciton binding energy, and chemical stability against hydrogen plasma [8, 9]. The synthesis of ZnO nanostructures is currently attracting considerable attentions because of their good physical properties. Various ZnO nanostructures have been demonstrated, including nanowires, nanotips, nanotubes, and nanocages [10–13].